Home > PARTS & ACCESSORIES > SLINGS & SLING MOUNTS
Sort By:
Page of 1
Impact Weapons Components (IWC) Keymod Bipod Mount Impact Weapons Components (IWC) - Bipod Mount-N-Slot - Keymod

Want to add a bipod stud to your KeyMod featured hand-guard? Impact Weapons Components has you covered with their Keymod Bipod Mount-N-Slot. A simple bipod mount that attaches directly to your keymod rail and requires no rails or adapters.

Our Price: $8.99
In Stock
(6)
Impact Weapons Components (IWC) Keymod QD Sling Mount Impact Weapons Components (IWC) - QD Sling Mount - Keymod

Impact Weapon Components makes some of the nicest attachment points and at a great price to boot. Their Keymod QD Rotation Limited Sling Mount is no exception.  Sleek, billet, low-profile design and costing as much as half of some of their competitors. IWC comes through again. Works with all standard and heavy duty push button QD sling swivels.  Rotation is limited to allow proper positioning of sling to accommodate different carry positions.

Our Price: $15.99
In Stock
Magpul QD Paraclip Adapter Sling Attachment Point Magpul - QD Paraclip Adapter Sling Attachment Point

This neat QD mount from Magpul allows you to attach your Paraclip style sling to any modern QD featured rail, handgaurd or buttstock and gain the clean and simple quick detachment functionality.

Our Price: $15.99
In Stock
Impact Weapons Components (IWC) Q.D. Receiver End Plate Impact Weapons Components (IWC) - Q.D. Receiver End Plate

AR Receiver End Plate with ROTATION LIMITED QD Sling Swivel Socket from Impact Weapons Components

Our Price: $17.99
In Stock
(15)
MAX-OPS A-TAC Single Point Sling-Pink

Max-Ops A-TAC Single Point Sling for use on tactical rifles or shotguns.

Our Price: $18.95
(Out of Stock)
MAGPUL MAG50 SGA Remington 870 Shotgun Receiver Sling Mount MAGPUL - SGA Remington 870 Shotgun Receiver Sling Mount

The Receiver Sling Attachment Point is an attachment point for the Remington 870 series of shotguns for clip-in style slings such as the Magpul MS3 series sling or other paraclip style slings.

Our Price: $18.95
In Stock
MAX-OPS A-TAC Single Point Sling-BLK

Max-Ops A-TAC Single Point Sling for use on tactical rifles or shotguns.

Our Price: $18.99
(Out of Stock)
(1)
KNS .250 Push Button pivot pin with Sling Stud

This pivot pin has a spring loaded push button. When pushed, the stainless steel keeper pins retract for easy pin removal. Once the pin is in place, simply push the button and slide the stud over the retracting balls and release. Put your sling swivel into the stud and you are ready to place your sling on the rifle.

Our Price: $19.99
(Out of Stock)
Blackhawk Storm Single-Point Sling Quick Release Black

The Blackhawk Storm Single Point Quick Detach Sling is a very fast and simple quick release sling that includes a 300 pound test side-release buckle for conveniently placing your firearm attachment and is just as fast to remove. The removable MASH clip allows for even faster firearm attachment. Sling is fully encased in elastic for silencing with an additional 6" of possible sling length adjustment.

List Price: $24.99
Our Price: $19.99
Savings: $5.00
(Out of Stock)
(1)
Fortis Mfg QD Receiver End Plate Fortis Mfg - QD Receiver End Plate

The Fortis QD Receiver End Plate features the quick detach swivel socket. Can be used on new builds or adding to existing rifles and replaces the existing receiver end plate (egg plate) used with carbine style buffer tubes for the AR15 & 308 platforms.

List Price: $22.95
Our Price: $21.99
Savings: $0.96
In Stock
(4)
Fortis MPSA Receiver End Plate LH Fortis Mfg - Multi-Point Sling Adapter (MPSA) - Left Hand

The Fortis MPSA™ Multi-Point Sling Adapter features 2 most popular sling attachments in one. (Quick Detach Swivel & Loop). Can be used on new builds or adding to existing rifles and replaces the existing receiver end plate (egg plate) used with carbine style buffer tubes for the AR15 & 308 platforms.

Left Hand Version

List Price: $22.95
Our Price: $21.99
Savings: $0.96
In Stock
Fortis MPSA Receiver End Plate - Ambi Fortis Mfg - Multi-Point Sling Adapter (MPSA) - AMBI - Receiver End Plate

The Fortis MPSA Multi-Point Sling Adapter features the 2 most popular sling attachments in one. (Quick Detach Swivel & Loop). Can be used on new builds or adding to existing rifles and replaces the existing receiver end plate (egg plate) used with carbine style buffer tubes for the AR15 & 308 platforms.

List Price: $22.95
Our Price: $21.99
Savings: $0.96
In Stock
Fortis Mfg - Rail Attachment Point (RAP) Fortis Mfg - Rail Attachment Point (RAP)

QD socket mount for your picatinny rail equipped handguard, or flat top receivers. Give a versatile mounting point for your QD equipped sling

Our Price: $23.99
In Stock
MAGPUL Ambidextrous Sling Attachment Point - ASAP Receiver End Plate MAGPUL - Ambidextrous Sling Attachment Point - ASAP Receiver End Plate

The Magpul ASAP Receiver End Plate Ambi Sling Attachment point. offers a 180 degree range of motion of the sling attachment point and can be used by both left or right handed shooters. This sling mount gives the shooter a tactical advantage allowing a full range of motion and minimizes binding while switching shoulders. This is particularly important in situations such as shooting around corners or if the shooter was injured. The ASAP is designed for use with Paraclip style sling attachment points.

Our Price: $26.95
In Stock
(9)
Magpul - QDM Quick Disconnect Sling Swivel MAG543 Magpul - QDM Quick Disconnect Sling Swivel

Precision cast QD sling swivel with new dual release feature.

Our Price: $26.99
In Stock
Magpul RSA (Rail Sling Attachment) PIcatinny Sling Mount Magpul - RSA (Rail Sling Attachment) PIcatinny Sling Mount

The Magpul RSA (Rail Sling Attachment) picatinny sling mount provides a forward sling attachment point for paraclip style slings and is made from precision cast black manganese phosphated steel, the RSA attaches to any MIL-STD-1913 Picatinny rail.

Our Price: $28.95
In Stock
(3)
Magpul - RSA QD (Rail Sling Attachment Quick Detach)

The RSA-QD provides a forward attachment point for the Magpul MS4 Sling and other push-button QD swivel sling systems. It is Melonite finished steel, mounts on 1913 Picatinny rail, and places the attachment point at an angle optimized for comfortable two-point sling use while maintaining easy push-button access.

Note: QD Swivel not included

Our Price: $28.95
In Stock
Magpul ASAP QD Ambidextrous Sling Attachment Point Magpul - ASAP QD Ambidextrous Sling Attachment Point

Mapul has taken their ultra popular (ASAP) Ambidextrous Sling Attachment Point Receiver End Plate to the next level with the introduction of the Ambidextrous Sling Attachment Point  Quick Detach (ASAP-QD). Their version of the Q.D. Receiver End Plate is precision cast, black Melonite finished steel and is compatible with both mil-spec and commercial receivers extension tubes.

Our Price: $28.95
In Stock
(5)
MAGPUL MAG508 SGA Remington 870 Forward Sling Mount / Barrel Clamp MAGPUL - Forward Sling Mount / Barrel Clamp - Remington 870

The Forward Sling Mount is a sling attachment point for the Remington 870 series of shotguns which clamps onto the barrel and extended magazine tube. It can be configured for use with either Push-Button QD Sling Swivels or one-point clip-in style attachments such as the Magpul MS3 series of slings.

Our Price: $29.95
In Stock
Impact Weapons Components (IWC) 45 degree Picatinny QD Sling Mount Impact Weapons Components (IWC) - 45 degree Picatinny Quick Detach (QD) Sling Mount

THE LOWEST PROFILE QD Rotation Limited Sling Mount. PERIOD!

45 Degree Offset design recesses the Quick Detach Socket as close to the centerline of the weapon as possible for maximum clearance. Directly attaches to all Picatinny MIL-Spec 1913 & STANG Rails. Compatible with all Push Button QD Sling Swivels.

Our Price: $29.99
In Stock
(4)
Magpul - MS1Sling (Multi-Mission Sling System) MS1 System- (color)

The MS1 System from Magpul is multiple slings in one. A basic webbed sling, or easily up-gradable to to a 2-1 comvertible MS3, or MS 4 QD Sling with optional hardware.

Our Price: $32.95
In Stock
(1)
Fortis Mfg - Rail Attachment Point (RAP) w/ QD Swivel

Fortis Mfg Rail Attachment Point with its compact & robust design is perfect in size and function. The RAP™ accepts the Heavy Duty quick detachable sling swivels. Made of 6061 aluminum and hard coat anodized to a deep black finish. The RAP™ allows you to attach your sling with a minimal footprint on your rail system and is rotation limited.


***Quick Detach 1 1/4" Swivel Included***

Our Price: $33.99
In Stock
(2)
Phase 5 Tactical - Single Point Bungee Sling-BLK

Phase 5 Tactical-Single Point Bungee Sling with MOLLE attachment system.-BLACK- The P5T Single point bungee sling allows the weapon to be carried close to the operator's body resulting in a quick to-shoulder situation. 


Heavy duty elastic cord with reinforced hog-ring clips for extra weight support.

Our Price: $39.99
(Out of Stock)
Phase 5 Tactical Single Point Bungee Sling - OD Green Phase 5 Tactical - Single Point Bungee Sling - OD Green

Phase 5 Tactical-Single Point Bungee Sling with MOLLE attachment system.- OD Green - The P5T Single point bungee sling allows the weapon to be carried close to the operator's body resulting in a quick to-shoulder situation.


Heavy duty elastic cord with reinforced hog-ring clips for extra weight support.

Our Price: $39.99
In Stock
(2)
Magpul MS3 Multi-Mission Sling Gen-2 - Black Magpul - MS3 Gen-2 Sling (Multi-Mission Sling System) - Black

Featuring a new low-profile quick adjust slider the the Gen 2 Magpul MS3 Sling allow for easy one hand adjustment and converts easily from one-point to two-point depending on the operators needs. Designed for use with Magpul's: ASAP, MSA, and RSA attachment points and all other clip-in sling mounts.

Our Price: $47.95
In Stock
(1)
Magpul MS3 Multi-Mission Sling Gen-2 - Coyote Brown Magpul - MS3 Gen-2 Sling (Multi-Mission Sling System) - Coyote Brown

Featuring a new low-profile quick adjust slider the the Gen 2 Magpul MS3 Sling allow for easy one hand adjustment and converts easily from one-point to two-point depending on the operators needs. Designed for use with Magpul's: ASAP, MSA, and RSA attachment points and all other clip-in sling mounts.

Our Price: $47.95
In Stock
(1)
Magpul MS3 Multi-Mission Sling Gen-2 - Grey Magpul - MS3 Gen-2 Sling (Multi-Mission Sling System) - Gray

Featuring a new low-profile quick adjust slider the the Gen 2 Magpul MS3 Sling allow for easy one hand adjustment and converts easily from one-point to two-point depending on the operators needs. Designed for use with Magpul's: ASAP, MSA, and RSA attachment points and all other clip-in sling mounts.

Our Price: $47.95
In Stock
(1)
Magpul - MS4 Dual QD Gen-2 Multi-Mission Sling System - (Color)

The Magpul MS4 Dual QD Gen 2 Sling features two heavy-duty push-button Quick Detach sling swivels rather than the Magpul Paraclip.  This modification allows compatibility with QD sling cups commonly found on lower receivers, receiver end plates,  and buttstocks., and many low-profile forward QD Sling mounts, including the Magpul RSA-QD.

Like the standard MS3 Sling, the MS4 can quickly switch between one-point and two-point configuration.

Our Price: $59.95
In Stock
(1)
PHASE 5 Tactical - Revolving Sling Attachment (REVO) Receiver End Plate

The Phase 5 Tactical™ Revolving Sling Attachment Solution (REVO-SAS)™ was developed to solve problems that come with other attachment methods. The REVO-SAS™ is an ambidextrous rear sling attachment solution that moves from left to right freely, smoothly and quietly.  The REVO also has patent pending technology developed to limit the amount of rotation internally and eliminates external issues completely. The REVO-SAS™ is machined from billet steel for maximum strength and durability. Comes with a Phase 5™ custom machined castle nut specifically included to fit with Mil-spec buffer tubes and comes in a mil-spec phosphate finish.

Our Price: $64.99
In Stock
(1)